Today to share with you the knowledge of disassembly of BISS wireless car charger, which will also explain the disassembly of BISS wireless car charger bracket, if you happen to solve the problem you are facing now, don't forget to pay attention to the site, start now!
< ul>1, iFound jack: multiple recommended reasons: Bluetooth automatic connection on the car, answer the phone, the sound is also very clear, there is an independent switch, easy to use, points out a driving recorder, a purifier.
2, PHILIPS (PHILIPS) small and beautiful, exquisite workmanship, full metal shell, full metal material, looks very muchTexture, plug into the car, there will be a circle of white light belt, and then charging speed, my iPhone, plug in charging speed is very fast. 3, followed by TOTU, charging fast and good, the line is not hot, the appearance and feel are very good, the car charge is also very good quality, three charging ports can be charged at the same time, and no matter what type of mobile phone can be charged, the brightness is soft when used at night, the light does not sting the eyes, the heat is also barbar drop, very safe, no longer afraid of the phone will be out of power.
4, the car charger can not only charge the mobile phone, but also plug the cigarette lighter and tachograph, the following small seriesWhich is the best multi-functional car charger? Several multi-functional car chargers are recommended. BIAZE comes with atmosphere lights, the overall alloy material, very atmospheric, charging is also very fast, easy to carry, car charger intelligent temperature control, small and convenient, intelligent temperature control, very powerful, charging effect is also good.
1. The power supply is faulty. The battery of the charger is too low or the machine fails, you can connect the charger to the power supply, heavyNew charge. Poor contact. If the charging device is in poor contact with the charging base or the interface is dirty, use a soft cloth to clean the metal contact points on the charger and charging device. The power supply does not match. If the charger and the power supply do not match, it will lead to insufficient power and cannot be charged normally.
2, the reason for the battery heat: the power consumption of the mobile phone in standby is very small, that is, the equivalent load resistance of the battery is large, so the discharge current is very small, so the battery will not heat, the internal consumption of battery power is very small. The power consumption of a mobile phone when it is waiting for a call or using MP3 is very large, that is, the equivalent load of its batterySmall resistance, working is a large current discharge.
3, do not work and heat, should be more short circuit, if it is local heat, it is likely to be a local short circuit of the external circuit, it is recommended to open the inspection. Exclude the local short circuit of the external circuit and heat, then your charging treasure can be thrown away, and the internal short circuit charging treasure becomes an indefinite time bomb. Mobile phone charging treasure, also known as mobile phone power supply, mobile power supply.
4, because the main structure of the wireless charger is a coil, the main structure of the device that your mobile phone receives wireless charging is also a coil, the coil overcurrent, heating is normal, the general temperature rise is notAgreed. (3) Input port failure: The charging bank input port is damaged or poorly connected, resulting in unstable charging current. (4) Charging power supply failure: The charging power supply failure of the charging treasure may cause the charging current to be unstable or unable to charge.
2, many users for the first time to use the mobile phone wireless charging function may occur when the mobile phone can not be charged, generally the reason for this situation may be that the mobile phone is placed on the charging board is not correct or the charging device is not powered on. Wireless charger does not charge how to first confirm whether the mobile phone model supports wireless charging function, (can be found in the brand official websiteCheck whether the indicator light of the charging pad is on.
3, internal fault: there is a fault in the internal circuit of the charger, such as thermistor damage or circuit board short circuit, etc., turn off the charger, stop using for a period of time, and let the charger cool naturally. Excessive current: the voltage or current used by the charger exceeds its rated range, causing the charger to overheat. Check the operating instructions of the charger to confirm whether the voltage and current used by the charger are within the rated range.
4, the reasons are as follows: the data line is in poor contact, it is recommended to use a new line or use the original data line. The output current is too small,The power bank can be charged with the 2A adapter. The power supply of the charging treasure is excessive, resulting in no charging, with both ends of the usb port of the line, one end of the power supply outlet, one end of the computer u port for one to three minutes, you can activate. Check the ports, circuit boards, and batteries of the charging bank.
The choice of VVS3610AE MOS tube is the South core SC9711 and the WIG MOS tube in DC-DCThey play an important role in the conversion, and together with the South Core SC3503 synchronous rectifier controller and the AOS32922 synchronous rectifier MOS tube, they achieve high performance voltage regulation. The precision design of the output filter capacitor and inductor, as well as the addition of the secondary buck IC SC9711 (made by the South core, supporting 100W power), further optimizes the output performance.
The output VBUS switch tube is packaged with VZ VS3610AE, NMOS, 30V, PDFN3333. Vvs3610ae data information.
Charging head networkAnd by disassembling it, Also using Weiqian WT6633P are Millet 55W gallium nitride charger, Nut 65W single C port gallium nitride charger, Millet 120W super fast charger, Millet 10 Pro original 65W fast charger, Millet 9 Pro original 45W fast charger, Lenovo 27W USB PD fast charger, Anfurui 63W double-mouth fast charger and other products. The output VBUS switch tube is in the package of VS3618BE, NMOS, 30V, PDFN3333.
To this MDY-08-EV and MDY-11-EM, is the model of the charger, for example, MDY-08-EV original charger DC output is: 5V/2A. The MDY-11-EM charger DC output is: 5V/3A, 9V/23A, 12V/67A, 10V/25A. Therefore, these two different models of chargers, the parameters are also different.
First, the fuselage is light, reducing the burden for travel; The second is to use with electronic products such as mobile phones without worrying about scratching products. The disassembly of the charging head network found that this mobile power supply uses the SC1823 master of the South core insideChip, built-in power MOS, high integration, simplify PCB design, in terms of protocol using Tianyu FP6601H to achieve QC0, FCP, AFC, APPLE4A and other identification, good compatibility, product materials and workmanship are superior.
Of course, it can also be wireless charging for Samsung mobile phone and Galaxy Buds real wireless headphones at the same time, Samsung screen shows "wireless accelerated charging", indicating that the product also supports Samsung wireless fast charging. mophie dual wireless charging pad Removed. Mophie dual wireless charging pad RemovedDetach the top panel using double-sided tape attached to the housing. Unscrew and remove the top cover, inside are two separate wireless charging units.
The introduction of disassembling Bisi wireless car charger is here, thank you for taking the time to read the content of this site, more about disassembling Bisi wireless car charger bracket, disassembling Bisi wireless car charger information don't forget to find oh in this site.