Check whether the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge.
Fixed wireless charger. The owner needs to buy a suitable wireless charger equipment, and then fix the wireless charger on the vehicle, and the fixed position should be convenient for the owner to take. Connect the cigarette lighter. Connect one end of the USB data cable of the wireless charging device to the wireless charger.The other end is connected to the car cigarette lighter interface. Put it in your phone. Put your phone in a wireless charger and it will start charging.
Some high-end mobile phones of Huawei can support wireless charging in addition to super wired fast charging, and wireless chargers need to be purchased separately to use wireless charging. How to use Huawei wireless charger? Connect the charger (the charging tip that came with your phone or was purchased separately) to a power source. Connect the data cable Connect the charger to the wireless charger using the data cable. Place the phone Place the rechargeable area of the phone in the center of the upper surface of the wireless charger, and the phone shows that it is charging.
This timeYou can try charging with Huawei's original charger and data cable to see if it improves. If the problem persists, it could be a problem with third-party charging devices. Remember to remove the phone case while charging to enhance the touch experience. If you encounter this problem while charging in a fixed place, it may be because the supply voltage is unstable. At this point, it is recommended that you change the charging place to try.
Set the wireless reverse charging turn on to manual turn on, that is, it must be manually turned on in the setting of Huawei car automatic sensor wireless charger can be intelligent opened and closed, so sterile bumpy road conditions, built-in infraredLoose or damaged. If any problem is found, contact Huawei customer service or go to the after-sales service center for repair. Loose or damaged charging cable: Check that the charging cable is securely connected to the charging base and is not broken or damaged. If there is a problem with the charging cable, replace it with a new one.
If the white light flashes quickly, try to remove the protective shell of the device being charged, remove the foreign matter between the device being charged and the wireless charging base, and place the device being charged in the center of the wireless charger. Or try to replace the wireless charging base adapter, data cable, phone, or replace a wireless charger to eliminate the wireless charger problem.
This is normal and will always flash during use time. The causes and solutions of Huawei mate30pro wireless charging failure are as follows: Check the indicator of the wireless charging base. If the indicator is off, check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. You are advised to reinsert the device. Please check whether there are other items between the phone and the wireless charging base, and remove them if there are.
First make sure to use the official charging head, second, carefully look at the wireless charging instructions, encounter metal foreign bodies near, it will automatically cut off wireless chargingAnd continue to blink green light, power back to normal.
Pull out the power plug of the wireless charge directly from the cigarette lighter and then unplug the phone from the charging data cable.
This is to support the active release of it, you try to hold the phone when you will take the initiative to let go of the phone. Keep your hand on the power and try to take it off. It has infrared sensing, sensing that you put the phone, or try to pick it up, it will actively open, you take it in the middle and lower part of the phoneTry it out. If it still doesn't work, you can go to a physical store to see what the problem is.
Put the phone close to the wireless charger, wait for the arm to extend a certain width and then put the phone on. In addition, the side of the body is equipped with an induction key, which can be pressed to unlock the arm and take out the phone.
It is not recommended to disassemble the machine without permission. You are advised to bring related certificates to the nearby Huawei customer service center for repair. The methods for querying the address information of the Huawei customer service center are as follows: PassOpen my Huawei APP on your Huawei mobile phone and click Service to shop repair (the query path of service APP is: Click to shop repair, or click to shop repair for more quick service and select city/enter address).
General charger this thing want to open it, it seems to need a special tool, because now the charger above is no screws, these things can only rely on tools to pry it open.
Huawei 40W charging head Disassembly This charging head adopts ultrasonic welding, which is very strong and cannot be pry away from the welding, and needs to be disassembled by hacksaw "violence". Take apartAfter that, a lot of white glue will be found, and the internal PCBA module, output interface and various components are filled with white glue to prevent leakage resulting in leakage, and the reliability and safety are relatively high. In addition, the USB-A interface is waterproof.
1. Check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Check the back of the phone. If the protective phone case is too thickMay hinder wireless charging, it is recommended to remove the phone cover and re-charge the attempt.
2. The reason why the Huawei car wireless charger cannot be charged is as follows: Check whether the charging port is properly inserted and whether the car port is dirty or foreign. Please clean it before charging. When using the car charger, please turn off the high power consumption application, the power consumption of the system will affect the charging speed.
3, the problem of intermittent wireless charging may be caused by the following aspects: charger problem: If you use a wireless charger, it may be the charger itself has problems, such as the charger power cord is loose, the charger interface is dirty,The charger heats up, etc., which may lead to unstable wireless charging. Mobile phone problems: If your mobile phone has problems such as poor contact of the charging port and loose charging cable, it may lead to unstable wireless charging.
4, if your Huawei car wireless charger does not work properly in the standby or parked state, there are several reasons: Power supply: The vehicle's cigarette lighter jack usually loses power when the engine is turned off, which may cause the car wireless charger to not get enough power supply. Make sure your vehicle's cigarette lighter jack still provides power when parked.
5, you want to ask HuaFor wireless charger white light flashing how to repair? The steps are as follows. Power supply is insufficient or the voltage is unstable, by replacing the power supply in the car or using a regulator to solve this problem. The charger temperature is too high or the charger is faulty. In this case, cool the charger or replace the charger.
6, the situation can not be wireless charging reasons: the charger power is not enough Huawei car wireless charger power is generally 10W, if your mobile phone supports 15W or higher power wireless charging, then Huawei car wireless charger may not be able to charge your mobile phone. At this point, you can try using support 10WPower the phone to charge, or replace.
Huawei car wireless charger how to disassemble the introduction to talk here, thank you for taking the time to read the content of the site, more about Huawei car wireless charger how to disassemble, Huawei car wireless charger how to disassemble information don't forget to find in the site oh.