First, open the Huawei mobile phone and enter the home screen of the desktop. Find the Settings option and click to enter. Turn on Battery options Find the battery options in the Settings menu, turn on and find the wireless reverse charging switch. Turn on wireless reverse charging. Place the screen of your Huawei phone upside down on the desktop with the back facing up. Place the other mobile phone that supports wireless charging on the Huawei mobile phone in a glyph position with the back facing down.Multiple device charging At this point, you should see a reminder that it is charging.
Connect mobile phones/tablets and other devices to be charged via OTG data cable. Slide out of the Notification center from the top left side of the screen, tap to see more options, and select Reverse Charge. On the device to be charged, follow the prompts to select charging. Wireless reverse charging The device to be charged supports wireless charging. Please click Set battery on the phone/tablet with power output to turn on wireless reverse charging.
Go to Battery Settings and turn on the wireless reverse charging switch. Turn on the device to be charged and place it on the back of the phoneFace center position. Do not place metal objects between the mobile phone and the device to be charged. If the device does not start charging after 5 seconds, adjust the position and try again. During the charging process, if the device to be charged is away for more than 2 minutes, the phone will automatically turn off the wireless reverse charging switch.
The following uses Huawei P30 as an example: Go to Battery Settings (or go to the phone manager battery) and enable the wireless reverse charging switch. Turn on the device to be charged and place it in the center of the back of the phone. Warm reminder: Do not place metal objects between the mobile phone and the device to be charged. If a few seconds later, to charge the deviceCharging is not started, please adjust the position and try again.
The following uses Huawei P40 Pro as an example: Enable wireless reverse charging Settings: Set the battery on the mobile phone and turn on the wireless reverse charging switch. Warm reminder: Do not enable the wireless reverse charging function of the charged device. If the reverse charging function is enabled for two mobile phones at the same time, one mobile phone will randomly switch to the receiving end, which may cause abnormal charging. After the wireless reverse charging function of the mobile phone is enabled, do not place the mobile phone directly on the metal material.
1, Enter My device First, in the mobile phone service my page, click and select to enter "My device". Click to view device parameters Click to select View Device parameters and proceed to the next step. Select Fast Charge Select Fast Charge to check whether the current mobile phone supports wireless charging. Wireless charging Finally, after confirming, put the phone on the wireless charger, the charging prompt will be displayed, and it is OK.
2, the correct use of wireless charger: Connect the charger to the power supply. Please use the charging head provided with the accessory to chargeCable and self-purchased wireless charging dock. Place the charger on a horizontal surface or other location suggested by the manufacturer. Place the phone on the charger with the screen facing up. For best performance, place the phone in the center of the charger or in the location recommended by the manufacturer.
3, Hello, Huawei p40 mobile phone does not support wireless charging function, you need to use the charger for wired charging.
4. Huawei mobile phones can use wireless chargers. The following is an introduction to the use of wireless chargers. Device: Huawei phone p40pro System: Android 10 First open the desktop of the phoneGo to the "Service" menu. Click My at the bottom right and select My Device. Click and select [View device parameters] to continue the next step. Select the "Fast charge" option to check whether the current phone supports wireless charging.
5. Open the Settings on the Huawei mobile phone, as shown in the following figure. Then in the page that opens, click on the open battery option as shown below. Then in the battery page that opens, find the wireless reverse charging option, as shown below. Then in the open page, click and select the switch on the right, as shown in the picture below.
1, Mate50 series models: Huawei Mate50RS Porsche Design, Huawei Mate50Pro, Huawei Mate50. Mate40 series models: Huawei Mate40Pro, Huawei Mate40Pro, Huawei Mate40, Huawei Mate40E, Huawei Mate40EPro, Huawei Mate40RS Porsche Design. Mate30 series model: Huawei Mate30Pro5G, Huawei Mate30Pro, Huawei Mate30EPro5G, Huawei Mate30.
2, there are only three types of Huawei wireless charging mobile phones, the models are as follows: Huawei MateS Huawei MateS is equipped with a 5-inch, 1920x1080 pixel screen on the front of the body, and the pixel density is 401ppi. Huawei Mate20pro is equipped with a three-camera design, adding super macro and super night scene, etc. If it is to compare, it may not lose to the iPhone EXsMax.
3On January 6, 2020, Huawei mobile phones that support wireless charging are Huawei MateRS, Huawei Mate20 Pro, Huawei Mate20 RS, and Huawei P30 Pro. Huawei MateRS supports dual speakers, 4000 mAh battery, 10W wireless charging, 5V/5A super fast charging, IP67 water and dust resistance, aviation cooling technology, leather accessories, under screen fingerprint recognition, face recognition unlock function.
4. Huawei mobile phones that support wireless charging are: Huawei Mate 40E Pro, Huawei P50 Pro, Huawei Mate 40E, Huawei Mate 40 Pro, Huawei Mate 30 Pro, Huawei Mate 20 Pro, Huawei P40 Pro, etc.
5, Huawei support wireless charging mobile phones include the following: Mate 50 series models: Huawei Mate 50 RS Porsche design, Huawei Mate 50 Pro, Huawei Mate 50. Huawei P40pro: Wireless charging has a 40W wireless fast charge, and the charging speed is definitely the top three. dispositionKirin 990 5G, microcrystalline ceramic body, four curved full overflow screen, 100 times zoom, is definitely the most high-end mobile phone in China now.
1, when the wireless charger is powered, directly place the phone screen facing up in the center of the charger or the position suggested by the manufacturer to charge.
2. Mobile: Huawei mate40 System: Hongmeng 0 Software: Mobile phone Manager 0 Open the Settings and click battery. On the battery pageClick on Wireless charging Settings. The function will always be on. Select the right charger: Pay attention to the use of brand certified chargers, otherwise the device will be charged with unstable, too high, too low current, resulting in damage to the device.
3. To enable the wireless charging function of a Huawei mobile phone, perform the following steps: Locate the Settings icon on the desktop of the mobile phone and tap. Find the "Battery" option in the Settings and tap to enter. Find the "Wireless reverse charging" option in the battery Settings and turn on the switch on the right. Place the backs of the two phones against each other, making sure there is nothing between the two phonesTry me.