Today to share with you the knowledge of Huawei wireless backcharging did not respond, which will also explain Huawei wireless backcharging did not respond, if you can happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>1. Check whether the wireless reverse charge switch is enabled. The path to set the mobile phone is as follows: Set the battery and turn on the wireless reverse charge switch. If the battery of the phone itself is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%.
2, 3, check the inside of the original charging data cable, whether there is contactGood and other problems (this is necessary, in order to find the cause, also need to replace the test). (4) Check the charging data cable plug and the mobile phone charging tail plug to see whether there is poor contact between the two. (5) Check whether the battery inside the mobile phone is normal (this check, it is best to ask a professional teacher, the mobile phone battery can be tested).
3. Go to Set Battery and check whether the Wireless Reverse charging switch is on. The battery of the phone itself is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%. In handWhen the power of the machine itself is less than 20%, the mobile phone will automatically turn off the external wireless reverse charging to ensure the normal work of the mobile phone itself and a good charging experience.
4, there may be compatibility problems resulting in abnormal recognition of the phone, it is recommended that you replace the cable that can be used normally. If the problem persists, back up your data in advance (third-party applications such as QQ and wechat need to be backed up separately), and take your mobile phone, data cable, and related purchase vouchers to a nearby Huawei customer service center for testing.
5, you can follow the following methods to determine the cause of the problem: 1, please confirm whether there is a charging icon ifYour phone has been turned on, but there is no charging icon after connecting the charger. Please check the connection of the charger and cable. Please make sure that the charging interface is clean and the port connection is stable before charging the phone.
Users can use the "battery" in the Settings menuOption to turn on the reverse charging function.
Huawei reverse charging can charge mobile phones that support reverse charging, such as iPhone X, Samsung NoteNote9 and so on. Huawei mobile phones belong to Huawei Consumer business, as one of the three core businesses of Huawei, Huawei consumer business started at the end of 2003, after more than ten years of development, in China, Russia, Germany, Sweden, India and the United States and other places set up 16 research and development centers.
The following uses Huawei P50 Pro as an example: Go to Battery Settings (or go to the butler battery) and enable wireless reverse chargingSwitch. Turn on the device to be charged and place it in the center of the back of the phone. Warm reminder: Do not place metal objects between the mobile phone and the device to be charged. If the device does not start charging after a few seconds, adjust the position and try again.
Huawei reverse charging always automatically shut down reasons: insufficient power, high temperature, compatibility problems. Low battery: Make sure your Huawei phone has enough power to support the reverse charging function. If your phone battery is low, the system may automatically turn off the feature to protect the normal use of the phone. Overtemperature: When the temperature of a Huawei mobile phone is too high, the system automatically restartsTurn off the reverse charging function to prevent overheating.
1. If a Huawei mobile phone cannot use wireless charging, perform the following steps: 1. Check whether a wired charging device is connected at the same time. If both wired charging and wireless charging are used, wired charging is preferred.
2, check the charger and power adapter: make sure that the wireless charger and power adapter you use is compatible with Mate 30. At timesIncompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances may interfere with the normal operation of the wireless charging function.
3, the methods that can be taken in this case are: determine that the phone is compatible with the wireless charger, check the charger and the power adapter, check the alignment between the wireless charger and the phone. Make sure your phone and wireless charger are compatible: Make sure your phone supports wireless charging and that the wireless charger is compatible with