May be due to the battery is out of power, resulting in failure to turn on. If this is the case, we can not turn on the phone, please first connect the phoneOn the power supply, if you see a charging sign on the screen at this time, and the power is very low, that is, the battery is out of power. Do not think that when connected to the power supply, in charge, you can turn on normally.
The battery cannot provide enough power to run the system, so it automatically shuts down.
General mobile phone automatic shutdown has the following reasons, can be self-investigation. 1) Check your phone for viruses. The phone suddenly restarts too often. It's probably a virus. You can first use the mobile phone security guard to scan and kill viruses on the mobile phone and clean it up. 2) Uninstall some unnecessary software. Mobile phone installation programToo much sequence, too much software running at the same time, it is easy to run over, resulting in the phenomenon of restart. 3) Software conflict problem.
Apple 5 why the old automatic shutdown, and can not open, a plug charger can automatically turn on? The reasons for this situation are that the battery of the mobile phone is broken, or the oxidation of the battery contact leads to poor contact, it is recommended to replace the battery or make the battery contact good. The second is the mobile phone motherboard problem, the former is very likely.
Hardware failure or poor battery contact: This needs to be taken to after-sales testing or replacement of the battery. Installed software conflicts:Check whether the use of a third software will restart this situation, if so, it is recommended to uninstall or download a new version to try, if you can not determine which software is caused, you can back up the phone data and restore the phone to factory Settings.
1. Place the charging disc on the back of the iPhone12, observe the green battery displayed on the screen, and you can automatically turn on the wireless charging function and start charging.
2. Open iPhone 13: need to replace the original mobile phone data cable or the original charger plug before charging; The charger and data cable connector are aging for a long time or the interface is dirty: you can change a charging head. Or take a fine piece of metallographic sandpaper cut the appropriate size, fold it in half a few times, gently polish it at the interface, and then plug it in to charge it.
The Apple 5s always restarts when charging may be due to a problem with the charger or charging cable. First, you can try replacing other chargers and charging cables to see if the restart problem still occurs. Sometimes, the charger or charging cable may have a break or short circuitThe current is unstable during charging, causing the phone to restart.
Replace the battery: If you have an older iPhone, the battery may be exhausted and need to be replaced. If your phone is a newer model, it is recommended to go to an Apple after-sales repair shop or an officially authorized third-party repair shop to check and replace the battery. Check the charging port: Check that the charging port is clean and free of dust or foreign objects, and try to clean it gently with a cotton swab.
Software problem, charger or charging cable problem. Software problems: Caused by errors in the operating system or application. You can try updating the latest iOS version, or reinstall some of the applications that may be causing the problem. Charger or charging cable problems: The charger or charging cable used is incompatible or damaged. Use original chargers and charging cables to ensure their quality and compatibility.
How to automatically shut down/restart an iPhone when it still has power left: Use it in cold or hot environments. The best operating temperature of iPhone is between 0 and 35 degrees Celsius, please confirm the temperature range of the environment. Built-in lithium battery aging.
1, why the Apple 6splus will automatically turn on when it is powered off is a normal phenomenon. When the voltage of the power supply is insufficient, it will be shut down, and when it is charged to a certain amount of power, it will be turned on. 6s plus is turned on when charging, but also to remind the user that 6s plus is charging, and the user can understand the charging progress of 6s plus.
2, software failure, because of the BUG in the software operation, the internal mechanism automatically determines the restart, so you will find that it often automatically shuts down and restarts. mayTry upgrading the software again.
3, the reason for the general automatic shutdown may have the following possibilities: 1. The protection circuit in the lithium battery is too sensitive, so the current will be cut off. 2. The battery itself has aged. 3. The metal sheet in the battery contact position has dirt, resulting in poor power supply contact. 4. The joint between the battery and the phone is easy to loosen. Solution: Clean up the contact dirt and tidy up the loose position to replace the battery.
4, Apple 6 charging repeatedly switch the machine for the following reasons: (1) the battery is not original, you need to go to Apple's special mobile phone repair shop for replacement. (2) Whether the contact between the battery and the mobile phone battery connector is reliable and normal. If you find that it is relatively loose, there is a hidden danger of automatic shutdown, you can squeeze the battery and improve the contact between the battery and the phone battery connector.
There is a problem with the charger or charging cable, there is a problem with the phone battery. There is a problem with the charger or charging cable: Make sure you are using an Apple certified charger and charging cable and check if it isDamaged or worn. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
May be the mobile phone protection case is too thick, it is recommended to choose a thin mobile phone protection case or not use when using wireless charging. The phone case is too thick will affect the induction of the charging coil and the wireless charger in the phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
NoneCable charging accessories damaged, foreign body blocking, etc. Wireless charging accessories damaged: The use of an external wireless charger or accessories, damage or failure. Check that the charger and related devices are working properly to ensure that they are compatible with the Apple 13. Foreign object blocking: In the wireless charging area applicable to the Apple 13, any foreign object placed between the phone and the base, blocking the transmission signal will affect the normal wireless charging.
Too thick mobile phone case will affect the induction between the charging coil and the wireless charger in the mobile phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; handThe charging coil area in the machine is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
If the iPhone wireless charging suddenly does not charge, it may be because sometimes unpredictable errors occur in the update of the iOS system, which will cause problems with the wireless charging function, usually as long as the restart can be solved. Remove the iPhone case Sometimes the iPhone case is too thick will also lead to wireless charging, then you can try to remove the iPhone case, and then put back on the wireless charging board to charge.
ipThe introduction of hone6 wireless charge restart is here, thank you for taking the time to read the content of this site, more about the Apple 6s wireless restart, iphone6 wireless charge restart information don't forget to find on this site.