This article gives you a talk about the built-in wireless charging modification, as well as the corresponding knowledge points of the built-in wireless charging modification, I hope to help you, don't forget to collect this site. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, What is the experience of installing wireless charging and Carplay if the old car does not change and the machine does not break the line?
For vehicles without Carplay function, it is possible to install. There are two main ways to install it. The first is to install the Carplay module, which is on the original vehicle systemAdd Carplay functionality, with a choice of wired or wireless versions. Its advantages are simple operation, no need to change the original car line, low cost, while supporting the original car button control, dual system flexible switching, and does not affect the original car function and vehicle warranty.
Yes, there are two modes of installing a module and replacing a host. Install module: This way is to add a Carplay module on the original car system, which is divided into wired and wireless versions. Its advantages are simple installation, do not destroy the original car line, low cost, support the original car button control, retain the original car system, can double system switching,It does not affect the function of the original car, nor does it affect the vehicle warranty, which can be said to be the best way to install Carplay.
A car without CarPlay is not very reliable to install one yourself. It is necessary to add modules or directly replace the original vehicle/engine system, but the cost of retrofitting is relatively high. Another way is to install the Carplay box and use the Carplay function by switching. In short, only devices approved by Apple can use CarPlay. If the machine itself does not have CarPlay, there is no certification, you can only install other external devices to achieve this function.
Add-on module Add-on module As the name suggests is to add a Carplay module to your original vehicle system, divided into wired and wireless versions. The advantages of this installation method are simple and convenient, do not destroy any line of the original car, low cost, support the original car button control, retain the system of the original car, can be dual-system switch, does not affect any function of the original car, does not affect the vehicle warranty, can be said to be the best way to install Carplay.
usmile smart sonic electric toothbrush uses the current popular type-C charging interface, a charge can be used for half a year, such a long battery life, travel is more convenient to carry, even if there is no electricity, use the mobile phone data cable to connect and charge for a while.
With mobile phone wireless charger. Of course, the mobile phone wireless charger 20w can also be charged, if you put it on the reaction can be. The regular brand of electric toothbrush has a charge management IC, so the charging speed is actually determined by the toothbrush itself, and can play a protective role.
IfUse vivo mobile phone, Type-c is a shape of USB data cable interface, plug into the charging interface can be inserted positive and negative, do not need to distinguish the direction.
The wireless charger contains a copper transmitting coil. When the electric toothbrush is placed on the charger, the transmitter coil generates an electromagnetic field, which the receiver converts into electrical energy from the electric toothbrush battery. This process is called electromagnetic induction. Because the copper receiver and transmitter coils are small, wireless charging can only be charged at close range. Whether electric toothbrush wireless charging can be universal depends on the protocol used by electric toothbrushes.
There are a lot of electric now: Buy a wireless charging module: Choose a wireless charging module suitable for 23 Veron models. They can be purchased at auto parts stores, electronics stores or online shopping platforms. Find the USB port of the vehicle: Find the location of the USB port inside the vehicle. The USB port is located in the center console or armcase. Connect the wireless charging module: Connect the USB cable of the wireless charging module to the USB port of the vehicle.
2, you can first turn off the charging gun. Secondly, you can press the emergency stop button on the charging pile to power off. Finally, it can automatically power off after charging.
3. The method is as follows:Unscrew and remove the shift frame completely, running the line from below. After fixing the charger, insert the line along the lower gear shift to the interior panel in the position of the main driver seat, remove the lower line to extend to the fuse box. Connect the power supply to the safety box, connect the negative electrode, and restore. Byd Co., LTD. (hereinafter referred to as "BYD") was founded in February 1995 and is headquartered in Shenzhen, Guangdong Province.
4, the wireless charging system is installed in the car, the wireless charging system is connected to the power line, the modification is completed, the whole process is very simple as long as half an hour or so, do not spend time to leadWiring, also do not need to be dismantled, because it is a lossless replacement installation.
5, whether it is the traditional way of using 16A, 10A current, or the use of high charging current fast charging, it will be subject to the "wire fetters", the charging device and the line used when charging it will be limited by the site, wireless charging is to a certain extent to solve this problem. Wireless charging, also known as Wireless Power Transmission (WPT), is based on a coupled electromagnetic field as the medium to achieve electrical energy transfer.
1. First of all, open the APP of Xiaoai speaker, enter my interface after connecting with Xiaoai, click Bluetooth setting (as shown in the picture), enter the Bluetooth setting interface, and select the Bluetooth of the speaker to be found in the open state. Then, open the computer to enter the computer Settings Bluetooth interface, and turn on the Bluetooth switch. Click Add Bluetooth or another device, then select Bluetooth. Select Add Bluetooth device. Find the millet AI audio can complete the automatic connection.
2, want to change to the built-in power supply is the power supplyTo achieve the work needs of the small audio, the small speaker is 5V power supply, this plan to use the old mobile phone battery as a built-in power supply, so the battery needs to be boosted to 5V, which requires a mobile power control board that can be boosted, fortunately, these east have.
3, millet Bluetooth speaker charging to use a special Bluetooth speaker charger to charge; There are 2 kinds of charger for Bluetooth speaker, one is a traditional charger, and the other is a data cable charger with USB interface; Both can charge Bluetooth speakers, and the first is directly connected to the power supply. The second can be charged by a computer; Direct power charging can be fasterThe Bluetooth speaker is fully charged.
4, first download the Xiaomi audio app, click the top right corner profile picture. Then click the gear in the upper right corner (setting), turn on the Bluetooth device, click the connected Xiaomi wireless charger Bluetooth speaker, and connect the speaker with the app. Finally, set the clock in the app.
5, download and open the Xiaomi APP, enter the personal center, find the Settings, turn on the Bluetooth function of Xiaomi; Open the phone, enter the phone Settings, search for nearby Bluetooth devices, and find the Bluetooth name of Xiaomi in the device list; Select and tap, when the phone shows "connected", millet hasConnect, and the sound will come out through the millet, which can be used as a stereo.
6, first open the speaker Bluetooth, and then in the mobile phone Bluetooth search list to find the speaker name connection. The specific operation method is as follows: Open the small love speaker APP, turn on the speaker Bluetooth, turn on the speaker Bluetooth visibility. Turn on your phone's Bluetooth Settings and tap the speaker name in the Bluetooth search list to connect.
The introduction of built-in wireless charging modification is here, thank you for taking the time to read the content of this site, more about the built-in wireless charging, built-in wireless charging modification information don't forget to find oh in this site.