This article to talk about Samsung wireless charger, as well as Samsung wireless charger disassembly corresponding knowledge points, I hope to help you, do not forget to collect the site oh. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, How to remove the cover
1. Turn off the mobile phone and take off the mobile phone card with the card needle, as shown in the picture below. Use a hair dryer to heat the back cover of the phone, as shown in the picture below. Use a pry bar to lift the gap of the back cover, and then use a pry bar to slowly pry open the back cover, as shown in the following picture. After removing the back cover, find the middle frame snailUse a Phillips screwdriver to remove the screws in the middle frame, as shown below. Remove the middle frame, Samsung on7 6000 mobile phone disassembly completed, as shown in the following picture.
2, about Samsung mobile phone disassembly/assembly problem: Samsung mobile phone disassembly and installation, engineers need to use special tools to disassemble, do not recommend their own operation, so as to avoid unnecessary losses if the mobile phone problems, in order to more targeted understanding and solve the problem of the mobile phone.
3, all is OK. Point your fingernail at that spot and apply pressure to open the back of the phone. Open the back cover Note: Adjust the breathing, find oneWireless charging is supported. This function requires a dedicated wireless charging rear case and wireless charging base to achieve, S5 special wireless charging protective cover can be purchased at Samsung service center.
Hello: According to your description, the i9500 shell needs to be replaced. The front shell is connected with the display screen and cannot be replaced separately. The back shell and back cover can be replaced directly. The fee is subject to customer service system inquiry.
1, if your equipment has hardware failure, in order to reduce the damageIt is not recommended that you disassemble the machine by yourself. Please send the machine to the service center for inspection and judgment by professional engineers. The address information of Samsung Service Center/customer service phone number can be queried by the following methods: Please log in to Samsung official website - click on the upper right corner of after-sales service - click Find Samsung Service Center - select the product you want to query and the province and city to search.
2, Samsung s10 wireless charging module can be removed. Removal will affect the wireless charging function of the phone, and generally does not affect other functions.
3, the brand wireless charging ring is broken and the solution is as follows: Use the originalThe factory charger and data cable are connected to the power supply for charging. For the mobile phone with removable battery, you can shut down and remove the battery, use a cotton swab to clean the battery contact and the mobile phone charging interface. Bring the purchase invoice, repair card and machine to Samsung service center for inspection.
The introduction of Samsung wireless charger and Samsung wireless charger is over. Do you know if you can find the information you need? If you want to know more about this, remember to follow this site. < / p >