This article to talk about wireless can not charge the house, and wireless can not charge the corresponding knowledge points, I hope to help you, do not forget to collect this site. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, Portable wifi can't be chargedWhat's the matter?
1, the portable wifi can not be charged for the following reasons: charging line failure: If the charging line of the portable WiFi failsCan't charge other devices. At this time, you need to check whether the charging line is damaged or poor contact, and if there is a problem, you need to replace the charging line. Lack of battery capacity: The battery capacity of the portable WiFi is limited, and if the battery capacity is insufficient, it will not be able to charge other devices.
2, charger failure: try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter. If the charging cable is loose or damaged, current cannot be transmitted normallyMethod of charging. To replace a new charging cable, make sure the plug fits the connector tightly.
3, you can first remove the battery to try to see if the battery is removed, plug in to see if it can be used, if you can, it is the battery problem. If not, it's the equipment. If you are a grid user, you can contact customer service to replace the battery or the device. Their customer service is quick to deal with problems.
4, first of all, the most common reason is the charger or data cable problems. If you are using an incompatible or damaged charger and data cable, it may cause the portable WiFi to be unable to be positiveAlways charge. At this point, you can try to replace the charger or data cable to see if the problem is solved. Secondly, the battery of the portable WiFi may have been damaged or aged. Aging or damaged batteries can lead to reduced charging efficiency or even inability to charge.
5, your usb interface inside the solder joint loose, you left or right or up and down the usb interface part, good luck may be able to rush into once or twice, with me a problem. The best thing is to get a phone repairman to weld it for you. Ten dollars.
1, the charger is not compatible: wireless charging needs to be used with a compatible wireless charger. Make sure the wireless charger you use is compatible with your phone and is Qi compliant. Charger power problem: Make sure that the wireless charger is connected to a normal power supply and that the power supply voltage is stable. Obstacles between the phone and the charger: Make sure there are no metal or magnetic objects between the wireless charger and your phone.
2, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Confirm wireless chargeCheck whether the electrical indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in bad contact. It is recommended to re-plug it. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
3. Non-huawei wireless chargers may be incompatible with mobile phones, resulting in abnormal wireless charging function.
4, charger problem: Please use a charger that can support wireless charging of your mobile phone, such as the wireless charger of Xiaomi. If the charger is not used simultaneouslyIt may also cause no wireless charging. Device overheating: If the temperature of the phone is too high, it may cause the wireless charging function to fail. Please put the phone in a cool and ventilated place, and try wireless charging after the phone temperature drops.
1, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there is anything else between the mobile phone and the wireless chargerPlease remove the product if you have it. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, the charging position is not correct Check whether the phone is facing the center of the wireless charging board, if not, it may lead to failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
3, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
4, different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try. Please do not use too thick or magnetic insulation material/metal material protectionThese protective cases may affect the charging efficiency or fail to charge, or even overheat resulting in the phone being unable to charge or damaged.
5, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
6. The power supply is faulty. The battery of the charger is low orIf the machine fails, the charger can be connected to the power supply and recharged. Poor contact. If the charging device is in poor contact with the charging base or the interface is dirty, use a soft cloth to clean the metal contact points on the charger and charging device. The power supply does not match. If the charger and the power supply do not match, it will lead to insufficient power and cannot be charged normally.
1. Restart the device and routeDriver: Sometimes, restarting the device and router can solve Wi-Fi connection problems. Try turning off devices and routers, waiting a few seconds, and then turning them on again. Forget and reconnect to the Wi-Fi network: If your device is unable to connect to the Wi-Fi network, you can try to forget the Wi-Fi network and reconnect.
2, equipment failure: If your portable WiFi device fails, it may also lead to downtime. In this case, you can restart the device or contact customer service personnel to check the cause of the fault and repair or replace the device. In short, for withIf the WiFi is still stopped after the recharge, it is recommended to confirm whether the recharge information is filled in correctly in time, or contact the relevant customer service staff to solve the problem.
3, a few months did not recharge the phone fee, and now do not charge the phone fee, it is recommended to check whether there are the following situations: (1) The amount of unpaid downtime exceeds a certain time, the operator recovers the right to use the number and cancel the account, the card in the state of cancellation is unable to recharge. (2) The arrears stop is in the lock-up period, and the card in the lock-up period cannot recharge by itself. If this is not the case, it is recommended to contact the customer service of the carrier to which the number belongs for verification. The specific policy of the local carrier shall prevail. <4, this is the operator's overlord terms, there is no way, you can only find a way to deal with the manager of the telecom business hall through the relationship. Or someone else will get it.
1, wireless charging accessories damaged, foreign body blocking, etc. Wireless charging accessories damaged: The use of an external wireless charger or accessories, damage or failure. Check that the charger and related devices are working properly to ensure that they are compatible with the Apple 13. Foreign body blocking: Where applicableIn the wireless charging area of the Apple 13, any foreign matter placed between the phone and the base, blocking the transmission signal, will affect the normal wireless charging.
2, Apple 12 wireless charging can not be used for the following reasons: purchase and use of wireless charger is not compatible. A charger that supports the Qi wireless charging standard is required for wireless charging. Make sure the charger is working properly and meets the wireless charging requirements of the Apple 12. There is a physical barrier between the wireless charger and the iPhone 12.
3, taking iOS11 system as an example, Apple 11 wireless charging is not charged because the systemThere is a problem with the system program, resulting in abnormal charging function hardware, it is recommended to restore the phone to normal use. The iphone11 is a mobile phone released by Apple Inc., which was released on September 11, 2019. The iphone11 features an anodized aluminum and glass design, an A13 Bionic chip, and an ultra-wide-angle camera that supports 2x optical zoom.
4, taking iPhone13 as an example, Apple mobile phone wireless charging may be caused by network problems, try to restore all Settings try. Divided into 3 steps, the steps are as follows: 1 Enter the Settings General! --1 Number 12 id=' Why can't wireless charging go in? '> Why can't wireless charging go in?
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Confirm wirelessCheck whether the charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert it once. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If notThe original charger may not charge properly. Connect your phone directly to the wired charger to see if it can be charged.
This is the end of the introduction of the wireless can not charge the house and wireless can not charge the power, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >