1, the phone case is too thick will affect the mobile phone charging coil and wireless charger induction, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
2, cause: the system program has a problem, resulting in the charging function of the hardware is not normal, it is recommended to restore the phone can be used normally. Short circuit causes the iPhone to fail to charge, there areIt may be caused by a short circuit in the charging interface, and there are a large number of spring firing pins in the charging interface of the mobile phone, which can make the line closely connected to the plug of the charging data cable.
3, the reasons for the failure of wireless charging iphone11 are as follows: It may be that the mobile phone protective case is too thick, it is recommended to choose a thin mobile phone protective case or not use when using wireless charging. It may be that the phone is not aligned with the charging area of the wireless charger, it is recommended to check the wireless charger specification to determine the wireless charging area. It may be that the wireless charger is not suitable for the wireless charging system of the mobile phone, and it is recommended to use the charge that meets the wireless charging requirements of the mobile phoneAppliances.
1, cause: The system program has a problem, resulting in the charging function of the hardware is not normal, it is recommended to restore the phone can be used normally. The reason why the short circuit causes the Apple phone to be charged is probably caused by the short circuit of the charging interface, and there are a large number of spring firing pins in the charging interface of the phone, which can make the line closely connected to the plug of the charging data cable.
2, the mobile phone case is too thick will affect the mobile phone charging coil and wireless chargingElectrical induction, resulting in failure to charge normally. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
3, the reasons for the failure of wireless charging iphone11 are as follows: It may be that the mobile phone protective case is too thick, it is recommended to choose a thin mobile phone protective case or not use when using wireless charging. It may be that the phone is not aligned with the charging area of the wireless charger, it is recommended to check the wireless charger specification to determine the wireless charging area. Could be a wireless charger with a cell phoneWireless charging system is not suitable, it is recommended to use a charger that meets the requirements of mobile phone wireless charging.
4, the iPhone system update will repair some system faults existing on the iPhone, if your iPhone11 suddenly can not be wireless charging, it may be because of the automatic update of the application caused by the system incompatibility failure, in this case, You'll need to manually upgrade your iPhone11 to the latest version to fix the problem.
1, battery aging: the charging treasure is used for a long time, and the battery aging leads to a reduction in capacity and cannot be fully charged. (2) Outlet failure: The power bank outlet is damaged or poorly connected, resulting in unstable output current. (3) Input port failure: The charging bank input port is damaged or poorly connected, resulting in unstable charging current. (4) Charging power supply failure: The charging power supply failure of the charging treasure may cause the charging current to be unstable or unable to charge.
2, many users for the first time to use the mobile phone wireless charging function may appear when the mobile phone can not be charged, generally this situation appearsThe reason may be that the phone is placed in the wrong position on the charging pad or the charging device is not powered up. First confirm whether the mobile phone model supports wireless charging function, (you can find the mobile phone information on the brand's official website) Check whether the indicator light of the charging board is on.
3, internal fault: there is a fault in the internal circuit of the charger, such as thermistor damage or circuit board short circuit, etc., turn off the charger, stop using for a period of time, and let the charger cool naturally. Excessive current: The voltage or current used by the charger exceeds its rated range, causing the charger to overheat, check the charger>When the phone can be charged, it may not be charged. Generally, the reason for this may be that the phone is placed in the incorrect position on the charging board or the charging device is not powered on. First confirm whether the mobile phone model supports wireless charging function, (you can find the mobile phone information on the brand's official website) Check whether the indicator light of the charging board is on.
2, please check whether the connection between the wireless charger, charger, data cable is normal, do not place metal items between the mobile phone and the wireless charger, such as: magnets, magnetic cards, etc., such items will affect wireless charging. Don'tDue to the difference in coil position of the same brand model, the charging efficiency may be low or unable to charge, please place the wireless charging area of the mobile phone correctly in the wireless charger induction area.
3, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus cards, metal, etc.) between the device and the wireless chargerSubstance).
4, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
5, you can try to put the phone back on the charger, or replace a charger to solve the problem. Charger or phone has problems last if you haveTry the above two methods, but the phone still does not respond, then the problem may be in the charger or the phone. You can try using another charger or take your phone to a professional repair shop for inspection and repair.
6, when the millet wireless charger, millet wireless charger (universal fast charger) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again.
Wireless charger does not charge the introduction to talk here, thank you for taking the time to read the content of this siteMore about the wireless charger can be plugged in when it is not charging, and the wireless charger is not charged. Don't forget to look for information on the site.