Today to share with you the knowledge that the wireless charger is broken, which will also explain the damage to the wireless charger battery, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>The solution of the brand wireless charging ring is broken and not charged is as follows: Use the original charger and data cable to connect the power to charge. For mobile phones with removable batteries, you can turn off the battery and use itTry to clean battery contact and mobile phone charging interface with cotton swab. Bring the purchase invoice, repair card and machine to Samsung service center for inspection.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
If the wireless charger can't charge the phone,Please try: Use the original charger and data cable connected to the power supply. For mobile phones with removable batteries, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please makeElectrical socket loose, bad contact how to do? '> Mobile phone charging socket loose, poor contact how to do?
1, replace the charger: if the original charger is used, the interface may become thin due to long-term use, resulting in poor contact. You can try to replace a new charger to see if it can solve the problem. Replace the charging port: If the above methods can not solve the problem, there may be a problem with the mobile phone charging port itself, such as the welding spot behind the charging port may have opened.
2, can be cross-replaced with other data lines and mobile phone test, to confirm the problem of mobile phone tail plug orData line problem; If it is confirmed that the tail plug is loose, please take the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for professional engineers to test and handle.
3, the mobile phone charging interface is loose mainly due to the charging port dust, resulting in the charging cable jack is not in place, resulting in loose, not inserted, easy to drop and other problems. You can use a fine toothpick to gently pick in the tail insert to check whether there is dust. After picking out dust, wipe it with an alcohol cotton. Or first find the card needle or sewing needle that comes with the phone, and then gently swipe the card against the quasi-interface hole until the dust is clean.
4. CheckCharger and data cable: Use standard charger and data cable to charge, non-standard charger and data cable may be incompatible with the phone, resulting in abnormal charging. If there is a fault with the standard charger and data cable, please go to vivo customer service center for detection. Check the mobile phone charging port: Check whether the mobile phone charging port has foreign bodies, corrosion, dirt, liquid and other phenomena, if there is this phenomenon, please go to the vivo customer service center for testing.
5, if the vivo mobile phone is used, the charging contact can be dealt with in the following ways: check the charger and data cable Use the standard charger and data cable to charge, non-standard chargerAnd data cable may not be compatible with the phone, resulting in abnormal charging. If there is a fault with the standard charger and data cable, please go to vivo customer service center for detection.
6, if the vivo mobile phone is used, the charging interface is loose, you can view the following: Non-standard charger and data cable may be incompatible with the device, resulting in abnormal charging. If there is a fault with the standard charger and data cable, please go to vivo customer service center for detection. Please replace another data cable and try again. Re-insert the cable into the charging port to ensure full contact.
Replace the data cable: it can be checked by the charger plug, and sometimes the poor contact of the Apple charging port can be replaced by the poor contact of the Apple charging port due to the broken data cable. Replace the charger plug: it can be checked by the charger plug, and sometimes the poor contact of the Apple charging port can be replaced by the poor contact of the Apple charging port due to the damage of the charger plug.
Apple iPhone6 charging contact is bad charge can not charge what is the reason for the bottom interface of the phone into gray byAt the same time, we are used to putting the mobile phone in the pocket, the charging interface located at the bottom of the mobile phone is easy to enter the ash, which causes poor contact between the interface and the power cord plug. Therefore, when the mobile phone cannot be charged, please first check whether the interface at the bottom of the mobile phone is blocked by foreign bodies.
Do not look carefully may not find these foreign bodies have been drilled into the interface inside, but if you also have the problem of poor charging contact, try to use a flashlight to see whether there is a foreign body in the interface. You can use an iPhone SIM card pin or a paper clip to remove these objects. Final recharge test to see ifIt has returned to normal, if there is no foreign matter or the fault is still, then consider replacing the data cable or going to after-sales testing and maintenance.
There may be the following reasons and solutions for poor contact of the charging port of the Apple phone: the charger is not original: try to replace a charging cable and charging head. Internal welding of mobile phone charging port: Go to the mobile phone repair point for repair. Charging port has debris: With toothpicks, needles and other items, clean up mobile phone charging port debris. Charger failure: Replace a charging cable and charging head. The charging interface on the mobile phone motherboard is burned out: Go to the mobile phone repair point for repair.
About the wireless charger is broken and wirelessThis is the end of the introduction of the charger damaged battery, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >