1, the charging port is located at the bottom or side of the vacuum cleaner, insert the charger plug into the charging port of the vacuum cleaner. Plug the other end of the charger into a power outlet, and once the charger is connected to the power supply, the vacuum cleaner will start charging.
2, you can plug in the charger for a while and see if you can charge it. Generally insist on about an hour is appropriate. If you do not charge, you need to check whether there is a circuit protection device, if there is that canTo unravel. If there is no circuit protection device, it may be that the battery is damaged, then you can replace a new battery, and then it should be able to solve the problem.
3, the dog sweeping robot r60pro how to correctly charge 6400mAh large-capacity lithium battery than the previous generation power increase by 2 times to ensure that the suction is large enough, a single battery life of up to 4 hours, built-in 450ml large-capacity dust box, no need to pour dust halfway, easy to control the cleaning task of large apartment. Automatic recharging at the end of each cleaning, support breakpoint continued scanning function, fully charged back to the original position to continue working, no sweepingp>1, the power is not the same, not recommended for general use. The dog T12StormRinse and the dog T12ProRinse both have an inhalation power of 185AW and a battery life of 70 minutes, while the dog T12Pro has an inhalation power of 170AW and a battery life of 60 minutes. The T11 series is an integrated suction vacuum cleaner, of which the T11Plus has a suction life of 150AW for 60 minutes, while the T11ProRinse and T11CycloneRinse both have a suction life of 140AW for 50 minutes.
2. FuselageAnd charging base respectively have charging contact, put the body on the charging base, you can charge, the power adapter charging current is 800mA, charging 3 hours can work for 20 minutes.
3, all the charger how to measure good or bad: from the measurement of the charger output (low voltage, connected to the vacuum cleaner battery) plug the corresponding voltage, if there is 12V/16V/24V voltage, the charger is no problem. The absence of this voltage means that the charger is faulty and needs to be repaired. The charger is not difficult to repair and the parts are not expensive to update.
4, the official standard is 100-240V 135W adaptiveAc power charger, that is 135W power. Power adapter, also known as external power supply, is a small portable electronic equipment and electrical and electronic power supply voltage conversion equipment, commonly seen in mobile phones, liquid crystal displays and notebook computers and other small electronic products. It is composed of shell, transformer, inductor, capacitor, control IC, PCB board and other components.
5, the power supply voltage of the vacuum cleaner is 15 volts. The vacuum cleaner working voltage 15v means that the power supply voltage of the vacuum cleaner is 15 volts (V), that is, it needs to use a 15V battery or power adapter to supply power. A vacuum cleaner removes dustAnd other filth machines.
1, does the subject want to ask "the dog mite detector charging when the light has been flashing"? The battery is faulty. When charging the dog mite detector, the light has been flashing because the battery is used for a long time or aging, which belongs to the battery reason, the solution is to replace the new battery, and make sure to use the appropriate charger.
2, red, blue, green. red. When the dog mite control machine is insufficient, it will show a red situation. blue. The blue light flashing on the charging of the puppy mite control instrument means that the puppy mite control instrument has been fully charged. green. Puppy mite control meter charging green flashing indicates that it is charging.
3, battery aging may be the battery of the vacuum cleaner aging, so that the battery will not be charged, the red light shows the power, if this is really the case, it is best to send the vacuum cleaner to the repair shop to repair it, or directly replace a new battery. The red light here is not a power indicator, but a dust indicator, and the dust cup of the vacuum cleaner is filled with garbage, and if it is too dirty, the red light will remain on.
4. How can the anti-mite meter with no electricity be charged if the green light is broken or the machine is broken? First check whether the data cable or the charging head is broken. If not, then you can only be sure of one thing, that is, the charging port of the anti-mite meter is damaged. Normally it's for repairs. Plug in the power supply continuously for 24 hours for the first 15 days, and then use it for about 12 hours a day until the home is free of mites.
5. After the dust box is too full and the mites are used for a long time, if there is no timely cleaning and cleaning, there will be a lot of dust, dander, etc., in the dust collection boxAfter a certain upper limit, it can't continue to adsorb things, it will automatically stop working, remove the box and dump the garbage.
6, indicating that the mite removal instrument is faulty. If the household cleaning equipment fails, you can contact the business to see whether it is within the warranty period and whether you can provide corresponding maintenance and fault self-inspection suggestions.
1, dog vacuum cleaner d836 charging seat use method. Turn on the sweeper to clean the state, hold the machine, the red light flashes, there is a warning sound, the warning is suspended. Put the vacuum in front of the charging dock, machineCan automatically return to the charging station. The host power is insufficient, then by 5 hours of charging, you can determine whether the charging seat can be charged.
2, puppy t10 vacuum cleaner charging instructions: You can plug in the charger for a while, see if you can charge. Generally adhere to about an hour is appropriate, if not charged, it needs to check whether there is a circuit protection device, if there is a circuit protection device can be unlocked, in the case of no circuit protection device, it may be battery damage.
3, the dog vacuum cleaner can be directly charged or charged with the storage seat, I sometimes charge it and forget to take it down,Is not a lot of people like me, have this kind of trouble, but do not worry, it is full of charge will automatically power off, both save electricity and do not worry about will be charged bad, is not very worry.
4, you need to pull the plug off, and then reinsert the power outlet can be. The dog vacuum cleaner can not be charged may be no power outlet, you need to open the circuit breaker check, if there is a problem, you need to ask a professional electrician to repair. The puppy vacuum cleaner can not be charged to see if the power switch button of the vacuum cleaner is pressed, if the power switch button is not pressed, press and then charge it.
2, the power failure is one of the common problems that lead to the vacuum cleaner not being charged. First, check whether the socket is working properly, try to connect other appliances to the same socket, and confirm that the power supply is normal. If the socket doesn'tIf yes, check whether the power cable of the vacuum cleaner is damaged or in poor contact. Sometimes, the power cord may be worn or broken due to prolonged use, resulting in abnormal charging. At this point, you need to replace the power cable and try charging again.
3, may be the battery is broken, so can not rush into the electricity. So this is the time to replace the original battery. Because the battery has a life, generally 2-5 years. Specific with the use of the environment has a direct relationship. There are various causes of failure, and it is necessary to check, test and judge gradually from outside to inside, from mechanical to electrical, from software to hardware.
4, battery bad, batteryBroken, charging does not enter, charging current is small, natural green light.
5, the dog vacuum cleaner charged is not satisfied with the reason: the charger indicator light is abnormal, causing the illusion that some users are used to carrying the charger with the car, and because of turbulence, the phenomenon of the charger damaged and unable to charge is also very easy to occur. If the fuse in the battery is broken, the rain can easily cause a short circuit of the power supply, and then burn the battery fuse. Battery life end In this case, you can directly go to a professional repair shop for detection and repair.
6, the battery of the vacuum cleaner is aging, so that the battery will not be charged, of course, the red light showing the electricityIf this is the case, the user is best to take the vacuum cleaner to a repair shop for an overhaul, or directly replace a new battery. The red light here is not the electricity indicator, but the dust full indicator, the dust cup of the vacuum cleaner is filled with garbage, too dirty, of course, the red light will be on.
Puppy t10 vacuum cleaner charging instructions: You can plug in the charger for a while and see if you can charge it. Generally insist on one hour leftRight is appropriate, if not charged, it needs to check whether there is a circuit protection device, if there is that can be unlocked, there is no circuit protection device in the case, it may be battery damage. The general power of the charging vacuum cleaner is about 100W, the charging time below 70W is about 12 hours, and the individual is about 24 hours, but the price of the vacuum cleaner is also more expensive, if you are not sure, it must be charged for at least 12 hours.
What are the energy-saving skills of cordless vacuum cleaners? Today, a small series for you to solve the longest running time of the cordless vacuum cleaner is how many cordless vacuum cleanersGenerally need to charge 4-10 hours to complete the charge, sustainable work 20-40 minutes, it is the same as the mobile phone through the charger to keep the machine. Cordless vacuum cleaner, also known as handheld vacuum cleaner, rod suction, is a new type of vacuum cleaner, it does not need a power cord to complete the vacuum work.
This is the end of the introduction of wireless charging dogs and wireless charging projects, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >