Today to share the knowledge of wireless electronic scale can not be charged, which will also explain why wireless electronic scale can not be charged, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>The battery is faulty. For reason 4 or other than the above, it is recommended to return to the distributorStation processing. If you use a dry battery, please check whether the voltage of the dry battery is sufficient. If the voltage is insufficient, replace the dry battery (charge the battery). If you use ADAPTOR, pull out the ADAPTOR output connected to the electronic scale, and then install the dry battery. If it can be turned on, that is, the ADAPTOR is damaged, please replace it.
Hello, the electronic scale can not be charged, or the charging indicator is not bright, there is no reaction, indicating that the battery of the electronic scale has been unable to discharge normally. Or it is damaged. If you need to replace the battery, you can buy one online. It's easy to change.
First of all, check whether the fuse of the electronic scale is normal, because a blown fuse will cause no charging or charging indicator light is not bright. Secondly, confirm whether the battery voltage is normal. If the voltage is too low, it may also cause the electronic scale to be unable to charge or the charging indicator is not bright. Next, check that the voltage switch on the scale is set correctly and that the charging cable is properly connected to the scale.
Can not be charged, these faults are basically the problem of the power supply, the plug is loose, the contact is poor, or the line is damaged. After excluding these reasons, there is still no improvement, then contact the manufacturer directly after sale.
Reason: First determine whether the 110V/220V voltage switch of the electronic scale is adjusted to the same voltage as the power supply, and make sure that the charging cable is firmly inserted in the charging base on the scale. Check whether the charging cable is broken due to external factors. Check for bad fuses. The battery is faulty. If the indicator is off, it indicates that the power is off, so it cannot be charged.
Sometimes the charging line or charger of the electronic platform scale will also cause its battery to be charged, change a charger to see if it is good, it means that the battery is no problem. If there is no indicator when charging or>
1. Check whether the fuse is normal. Check whether the battery voltage is normal. First determine whether the voltage switching switch of the electronic scale is consistent with the use of the power supply voltage, and determine that the charging line is plugged into the electronic scale. Check whether the charging cable is disconnected by external factors. Except for the above factors, it is recommended to return to the distribution station for repair.
2, first determine the length of battery life, see whether it has been aging can not be used. Check whether the AC power supply has voltage, and check whether the power socket is normalThere is a problem, or the power cord is broken. The electronic scale will have a low-voltage alarm light when there is no power, and if there are multiple alarms, it is likely to be damaged because of a serious lack of power. We need a new battery.
3, the electronic reason for the battery itself, the battery does not store electricity to replace the new battery. If your electronic scale is normally charged for a night and can only be used for a few hours or a day, it means that the battery is aging and can be replaced with a new battery. The electronic charging line or the charger is the reason that the electronic battery is not charged, and a new charging line and charger can be replacedThere.
4, the battery problem may be the electronic scale battery itself. If not, it means the battery needs to be replaced. The battery has a certain life. A normal electronic platform scale can only be charged for a few hours a night or a day. One pound represents the aging state of the battery. Replace the battery promptly. Some new electronic scales use lithium batteries, which are much less likely to break down. If it is a lithium battery, contact the manufacturer's after-sales department in time.
5, first of all, determine whether it is a lead-acid battery problem, or a charging circuit problem.
6, is it because you lack electricity for too longThe battery will be solidified after a period of lack of power, and it must be activated.
Check whether the fuse isNo Normal. Check whether the battery voltage is normal. First determine whether the voltage switching switch of the electronic scale is consistent with the use of the power supply voltage, and determine that the charging line is plugged into the electronic scale. Check whether the charging cable is disconnected by external factors. Except for the above factors, it is recommended to return to the distribution station for repair.
The reason of the battery itself. If the battery is old and can only be used for a few hours or a day, then a new battery needs to be replaced. Electronic scale charging cable or charger reasons. If the charging cable or charger fails, the electronic scale will not be able to charge. At this time, you need to replace the charging cable and charger. If chargingThere is no indicator or charging symbol, you can try to replace the socket. Electronic scale motherboard reasons.
The reasons why the electronic scale can not be charged are: it may be a short circuit in the power line, affecting the charging; It could be a faulty fuse; The battery may not be charged due to poor contact.
Check whether the fuse is normal. Check whether the battery voltage is normal. First determine whether the voltage switching switch of the electronic scale is consistent with the power supply voltage, and determine the charging cable insertionOn the electronic scale. Check whether the charging cable is disconnected by external factors. Except for the above factors, it is recommended to return to the distribution station for repair.
First determine the length of battery life, to see whether it has been aging can not be used. Check whether the AC power supply has voltage, check whether the power socket is faulty, or whether the power cable is damaged. The electronic scale will have a low-voltage alarm light when there is no power, and if there are multiple alarms, it is likely to be damaged because of a serious lack of power. We need a new battery.
Problems with the internal circuit of the electronic scale can also cause the battery of the electronic scale to fail to charge. At this point, just checkInternal circuit, replace or repair the corresponding circuit. Some inexpensive electronic scales wobble during transportation, which may cause the battery line or other lines to wobble.
The problem with the battery may be a problem with the battery itself. If not, it means the battery needs to be replaced. The battery has a certain life. A normal electronic platform scale can only be charged for a few hours a night or a day. One pound represents the aging state of the battery. Replace the battery promptly. Some new electronic scales use lithium batteries, which are much less likely to break down. If it is a lithium battery, contact the manufacturer's after-sales department in time.
ElectricityThe reason for the battery itself is that the battery does not store electricity and a new battery can be replaced. If your electronic scale is normally charged for a night and can only be used for a few hours or a day, it means that the battery is aging and can be replaced with a new battery. The electronic charging line or the charger is the reason that the electronic battery is not charged, and it is OK to replace the new charging line and charger.
Some electronic platform scales do not have those built-in transformers, but also use the power line to charge, so this kind of charging line is built in, will be directly welded on the motherboard, so the motherboard problem will naturally lead to no charge.
1, the built-in battery of the electronic scale is damaged, causing the battery to be unable to charge and store electrical energy, so the electronic scale can not work without electricity after unplugging the charger. The internal battery of the electronic scale is low and needs to be recharged. The electrolyte of the backup power supply of the electronic scale was damaged, causing the electronic scale to have no stored power, so the electronic scale can not work after unplugging the charger.
2, charging circuit questionsQuestion, will cause this problem, I suggest you to test. If it is not the above problem, it should be your battery has a problem, it is recommended to replace.
3, two situations: First, the battery fails to charge. Replace the internal rechargeable battery. The second is the power interface in the battery charging circuit open fault, plug in the power can be used, but can not automatically charge the internal battery, unplug, and switch to the battery, so low voltage alarm. Carefully open the boot cover, carefully check the wiring or replace the battery to find the fault and solve it.
4, indicating that everything is normal with this electronic scale. Belongs to battery aging,It's time to replace the battery. When the battery of the electronic scale is in use, see that the display digital is slightly fuzzy and dim, immediately charge with the original charger (some have a charging circuit, only input 220v AC, if it is normal, the charging indicator should be bright), normal use, the new battery can be used for about three years.
Because the charging cable or charger of the electronic scale, the battery of the electronic scale can not be charged, replace the new charging cable and charger can be. Try another charger. Okay, the battery's fine. If there is no indicator or charging symbol when charging, you can try several sockets, or no, you can basically determine the problem of the charger or charging line. The problem with the motherboard does not include the charger and battery, which is estimated to be the main electronic platform scaleBoard.
The reason of the battery itself. If the battery is old and can only be used for a few hours or a day, then a new battery needs to be replaced. Electronic scale charging cable or charger reasons. If the charging cable or charger fails, the electronic scale will not be able to charge. At this time, you need to replace the charging cable and charger. If there is no indicator or charging symbol when charging, you can try to replace the socket. Electronic scale motherboard reasons.
This is the end of the introduction of the wireless electronic scale can not be charged and wireless electronic scale can not be charged. Do not know what you need to find the informationDid you? If you want to know more about this, remember to follow this site. < / p >