Today to share with you the millet wireless bracelet can not charge the knowledge, which will also explain the millet bracelet can not charge the electricity, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>1, the bracelet can not be charged generally may be the oxidation of the charging contact, the metal will generate an oxide film in the air, resulting in insulation, charging can not be charged. Solution: Use the data cable to rub the bracelet metal head, erase the metal oxide film, and charge the metal head to brighten up. Specific steps: Find an Android data cable or Apple data cable to find the charging metal head of the Xiaomi bracelet erase the metal oxide film, and re-move the charging metal head.
2, the bracelet can not be charged generally may be charging contact oxidation, you can try: first, please plug and unplug the bracelet body several times or slightly swing the hand ring body. secondlyPlease ensure that the USB interface (PC or other power supply device) is normally powered, and replace the USB charging cable of the Mi Band. Or replace the USB port of the power supply device. Once again, please check whether there is a prompt of "charging" in the interface of "My" - "Mi Band 2" in the Mi Sports APP.
3, the cause of the fault: the charging line is broken. Use too long, battery aging. Overuse of electricity. The solution is to remove the body of the bracelet from the wrist band and scrape the charging contact with a hard object; Also clean the charger contacts; Plug and unplug several times and press firmly to try; Long period without chargeUse the bracelet, fill about half an hour to see if it is normal.
4, charging method wrong, data cable damage, hardware problems and other links may lead to the bracelet can not be charged. This article will introduce the bracelet can not be charged troubleshooting methods. Replace the power supply and data cable should first replace a power supply and data cable, and check whether the charging base is closely linked, if it cannot be charged, it will exclude the problem in this link.
5, if the millet band has not been used for a long time, the battery may have entered a dormant state, and it needs to be activated by a specific method. Battery sleep state: Electronic device ifIf not used for a long time, the battery will automatically enter a "sleep" state to save power. In this state, the battery may not be able to be charged directly by conventional charging methods. The Mi Band's battery is no exception.
1, does the subject want to ask "Millet band 3 charging did not respond to the screen is not bright"? The battery is faulty. The line is faulty. Battery failure: The Mi Band 3 charging does not respond to the screen is not bright due to the failure of the battery for a long time,You can replace the battery at the local Xiaomi store. Line fault: This problem is caused by the internal fault of the line, and it can be solved by replacing the line.
2, the Mi band 3 can not be charged for a year because the bracelet is not used for a long time, it will be in a non-activated state, in addition to its charging shock may be oxidized, resulting in no charging, or charging no reaction. The solution to this problem is to remove the bracelet, clean up the charging shock on the main side of the bracelet, and then connect the charging cable, the other end of the charger do not disconnect, and the activation can be restored after shaking. <3, millet bracelet 3 charging no reaction [rice and charging slot is not inserted] This is the most common reason for charging no reaction, many users did not plug the rice and charging slot tightly, yes, the two sides of the metal joint can not be close contact, resulting in no charging reaction. The solution is to push both sides together more. The surface of the metal charging joint of the rice grain is easy to be oxidized, and the oxide covers the metal joint, resulting in no charging.
4, battery hibernation state: If the electronic device is not used for a long time, the battery will automatically enter a "hibernation" state to save electricityForce. In this state, the battery may not be able to be charged directly by conventional charging methods. The Mi Band's battery is no exception. Activate the battery: To get the battery active again, sometimes you need to use some specific methods.
5. After connecting the charger, wait for a while and change the charging head. If it still can not be solved, it is recommended to go to after-sales maintenance. Tip: The mobile power supply cannot charge the bracelet. Business links The above information is for reference only, the star card daily rental version is sent 20 yuan phone fee, 200G star card exclusive directional traffic package, brush video, play the whole network, easier, more free, details can log in GuangxiTelecom online business hall view. Customer service No. 343 for you to solve
6, under normal circumstances, after connecting the power supply, the millet band "rice" display will light up, but if there is no reaction, it may be the electrode contact there is a problem of poor contact.
1, suspected of illegal and criminal political information false junk advertising low quality irrigation We will inform you of the report results through messages, mailboxes and other ways as soon as possible.
2, solution: with the data cable, to rub the bracelet metal head, erase the metal oxide film, charge the metal head bright up. Specific steps: Find an Android data cable or Apple data cable to find the charging metal head of the Xiaomi bracelet erase the metal oxide film, and re-move the charging metal head. Charge it again and see if it can be charged.
3, check whether the charging contact point of the rice grain has stains, if so, gently clean away; Then stick the grain of rice on the charging wire; Plug the bracelet charging cable into the USB port of the phone charger, and then plug it into the power supply, or directly into the charging bank.Normally charged 3-5 times, the bracelet's lithium battery is fully activated.
4, taking the millet band 3 as an example, the reason why it is not charged for a long time: check whether it is the problem of the charging data line. Under normal circumstances, the charging data of the smart sports bracelet is a general USB data cable, if you do not charge it, you can try to change a data cable and then charge it. Check whether the charging base is tightly connected and whether there is poor contact.
5, example: for example, you have a millet band has not been used for half a year, when you try to charge it, found no response. At this point, you canConsider using a charger with a slightly higher voltage to try it. But if you're not sure what to do, it's best to contact Xiaomi's customer service or go to a repair shop for help. In order to avoid similar problems happening again, you can set the bracelet to be charged at least once a month, and maintain a suitable storage environment.
Bracelet can not be charged generally may be charging contact oxidation, metal in the air will generate oxide film, resulting in insulation, charging can not be charged. Solution: Use the data line, go to the motorcycleWipe the metal head of the bracelet, erase the metal oxide film, and the charging metal head is bright. Specific steps: Find an Android data cable or Apple data cable to find the charging metal head of the Xiaomi bracelet erase the metal oxide film, and re-move the charging metal head.
Battery sleep state: If the electronic device is not used for a long time, the battery will automatically enter a "sleep" state to save power. In this state, the battery may not be able to be charged directly by conventional charging methods. The Mi Band's battery is no exception. Activate the battery: To get the battery active again, sometimes you need to use some specific methods.
[The rice charging joint is covered by oxide] The surface of the metal charging joint of the rice is easy to be oxidized, and the oxide covers the metal joint, resulting in no charging. Take a small blade and gently scrape the metal joint, and then try to charge it. (3) [bracelet charging cable failure] This is a hardware failure, the detection method is to borrow the charging cable of friends around to try, if you can charge it, it shows that there is a problem with your charging line.
Bracelet can not be charged generally may be charging contact oxidation, you can try: first, please plug and unplug the bracelet body several times or slightly swing the hand ring body. Secondly, please ensure USB connectionWhen the port (PC or other power supply device) is normally powered, replace the USB charging cable of the Mi Band. Or replace the USB port of the power supply device. Once again, please check whether there is a prompt of "charging" in the interface of "My" - "Mi Band 2" in the Mi Sports APP.
You want to ask is the millet band 2 charging did not respond, the screen is not bright how? The battery is damaged and the charger is faulty. The reason why the Mi Band 2 does not respond to charging and the screen is not bright is that the battery has been damaged and needs to be replaced. The charger is faulty, or the charger used is not the original charger, will not be able to charge normally. Can beSolution: Use the data cable to rub the bracelet metal head, erase the metal oxide film, and charge the metal head to brighten up. Specific steps: Find an Android data cable or Apple data cable to find the charging metal head of the Xiaomi bracelet erase the metal oxide film, and re-move the charging metal head.
Battery sleep state: If the electronic device is not used for a long time, the battery will automatically enter a "sleep" state to save power. In this state, the battery may not be able to be charged directly by conventional charging methods. The Mi Band's battery is no exception. Activate the battery: To get the battery active again, sometimes it needs to be usedSome specific methods.
Bracelet can not be charged generally may be charging contact oxidation, you can try: first, please plug and unplug the bracelet body several times or slightly swing the hand ring body. Secondly, please ensure that the USB interface (PC or other power supply device) is normally powered, and replace the USB charging cable of the Xiaomi bracelet. Or replace the USB port of the power supply device. Once again, please check whether there is a prompt of "charging" in the interface of "My" - "Mi Band 2" in the Mi Sports APP.
Fault cause: The charging cable is broken. Use too long, battery aging. Excessive use of electricity, resulting inYes. The solution is to remove the body of the bracelet from the wrist band and scrape the charging contact with a hard object; Also clean the charger contacts; Plug and unplug several times and press firmly to try; If the bracelet is not charged for a long time, charge it for about half an hour to see if it can be normal.
The introduction of the millet wireless bracelet can not be charged and the millet bracelet can not be charged is over. Do you know if you can find the information you need? If you want to know more about this, remember to follow this site. < / p >