Today to share the knowledge of homemade wireless charging base, which will also explain the diy wireless charging base, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>Connect the phone's standard charger and data cable to the wireless charger, and then put the phone directly (vertically) or horizontally in the center position of the wireless charger base, wireless charging can be achieved, and the indicator light will have a breathing effect, 5 secondsAfter extinguishing, plug and play, convenient and fast.
Wireless charging base: refers to the charger connected to the terminal device that needs to be charged without the traditional charging power cord, using the latest wireless charging technology, through the use of the magnetic field generated between the coils, the magic transmission of electric energy, inductive coupling technology will become a bridge connecting the charging base station and equipment. [Usage] : Just connect the USB cable and plug it into the socket.
A base, shaped a bit like a tray, put the phone on the top, without connecting a charging cable, you can charge the phone, but this requires phone support.
Users only need to place the phone on the wireless charging dock to charge it automatically. No need to connect cables, convenient and fast. Turn on Wireless Charging To use the wireless charging function of the Redmi K60, you first need to ensure that the function is turned on. Users can find the "Battery" or "Charging" options in the phone's Settings menu and make sure the "Wireless charging" option is turned on.
Wireless charging, also known as inductive charging or non-contact inductive charging, based on the principle of electromagnetic induction, it does not need to transmit electricity to the device like the traditional wired charger, but will need to charge the deviceLine charging
1, you can buy a wireless charging receiver, paste it on the back of the phone or insert the phone charging port, the advantage of this method is that the cost is low, there is no need to replace the phone or disassemble the phone inside, the disadvantage is that it may affect the beauty and feel of the phone, as well as increase the wear and tear of the charging port.
2, the self-made mobile phone wireless charging method is as follows: Prepare materials: The mobile phone charger first cut the USB charging cable into two sections not far from the two ports. Use scissors to separate the tail glue of the two wires into a section to screen and then cut off the green wire with a double bottom line. Apply hot glue to the magnetStick to the charger. Wrap the wires in the USB with tinfoil. Then wrap the wires and roll them up with copper wire.
3, to add the wireless charging function to the ordinary mobile phone, the most critical is to install a wireless charging receiver. This process usually involves opening the case of the phone, finding where the battery or battery is connected, and welding or connecting the receiver to the appropriate circuit. This requires a certain amount of electronic knowledge and fine manual skills, because the components inside the phone are very small and fragile.
1. Open the mobile phone jacket, plug the receiving module into the charging port, connect the patch to the charging port of the mobile phone, and then put it on, remember to face up. Since the energy is transmitted between the charger and the electrical device by a magnetic field, no wires are connected between the two, so the charger and the electrical device can be exposed without conducting contacts. It is important to note that whether it is a mobile phone or a charging bank, it has a wireless function, that is, a wireless coil.
2, the principle of wireless charging treasure is to use wireless electromagnetic energy transmission technology to moveThe mobile device is charged. This technology enables the mobile device to be charged by establishing a radio magnetic field between the wireless charger and the mobile device, which transmits electrical energy from the wireless charger to the mobile device. Wireless charging bank usually consists of two parts: wireless charger and wireless charging module.
3, one is to achieve through the principle of electromagnetic induction, and now wireless charging can be achieved on small appliances such as smart phones. According to the principle of magnetic resonance, long-distance and high-power power transmission can be theoretically achieved, and safe without radiation. Wireless mobile power charging steps: Power charging: put the Micro USB One end of the charging cable is connected to the DC charging port (Micro USB port) of the product, and the other end is connected to the USB port of the charging adapter.
4, mobile phones that support wireless charging can be connected to wireless charging bank. Charging bank pre-charge: Plug the wireless charging bank into the power supply or USB port of the computer to charge. During the charging process, ensure that the wireless charging bank has sufficient power to avoid affecting the charging effect. Turn on wireless charging: Open the Settings in the mobile phone, click display, click to enter the column of battery and point amount, click the Settings in the upper right corner to enter the Settings page, click to turn on wireless charging.
This is the end of the introduction of self-made wireless charging base and diy wireless charging base, do not know if you find the information you need? If you want to know more about this, remember to follow this site. < / p >